MCP346x Sigma-Delta ADC

This crate contains a platform-agnostic driver for the MCP346[1/2/4] Sigma-Delta ADC, using the embedded-hal traits.

Currently, you can:

• Initialize the device
• Configure Input MUX and IRQ Pullup
• Set the conversion or power down mode
• Obtain measurements

Documentation

Usage

Single Measurement

use mcp346x::*;

let spi_pins = (sck, miso, mosi);
let spi = Spi::new(p.SPI0, spi_pins, Frequency::K500, MODE_0);

let address = 0b01; // This is the default address for most chips
let mut adc = MCP346x::new(spi, address).into_continuous_mode()?;

adc.set_clock_source(mcp346x::ClockSource::Internal)?;
adc.set_irq_internal_pullup(true)?;

let voltage = adc.measure()?;

Status

• Initialization
• Powerdown/wakeup/conversion
• Take Measurements
• Input MUX configuration
• SCAN mode
• Expose other Configurations
• Communication CRC checksums

License

Licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.