8 stable releases
3.0.1 | May 30, 2024 |
---|---|
3.0.0 | May 24, 2024 |
2.0.3 | May 22, 2024 |
2.0.0 | Apr 9, 2024 |
1.0.1 | Apr 8, 2024 |
#222 in Build Utils
1.5MB
454 lines
Arthouse
Art-Net (DMX over UDP/IP) adapter for Project Lighthouse.
Using this adapter, the Project Lighthouse display can be controlled like a standard DMX fixture from lighting controllers such as QLC+.
Getting Started
Make sure that LIGHTHOUSE_USER
and LIGHTHOUSE_TOKEN
contain valid Project Lighthouse credentials, then run
cargo run
Alternatively you can also pass the corresponding command-line options, see --help
for a detailed overview. By default, the adapter will listen on 0.0.0.0:6454
, i.e. the default Art-Net port, for UDP packets.
The following guide explains how to configure QLC+, though any other Art-Net client can be used too. First, make sure that you have at least three universes that output to Art-Net on localhost. This can be configured in the Input/Output tab:
Then switch to the Fixtures tab and add an RGB panel fixture:
The fixture needs to have 28 columns, 14 rows and "Zig Zag" displacement:
After confirming, RGB panels and a corresponding fixture group should have been added:
Finally, switch to the Functions tab and create an RGB matrix by clicking the corresponding button in the toolbar:
Select the previously created fixture group in the drop down menu on the right and click the play button to preview the animation:
If everything went well, the output should be mirrored to the lighthouse:
Dependencies
~10–20MB
~274K SLoC