MIT license

190KB
994 lines

artnet_to_opendmx

Works with both COM- and /dev/tty-Ports.

Usage:

artnet_to_opendmx.exe <UNIVERSE> <DEVICE_NAME> [OPTIONS]
artnet_to_opendmx.exe <COMMAND>

Arguments
< UNIVERSE >	The art-net universe to listen to
< DEVICE_NAME >	The interface port name

Options
-c	--controller	A specific controller to listen to (localhost is 0.0.0.0) (default: all)
-p	--port	The port to listen to (default: 6454)
-n	--name	The name of the node
-b	--break	The minimum time in milliseconds between two dmx packets (default: 25)
-r	--remember	Keep the last dmx values if the art-net connection is lost (default: false)
	--verbose	Print information about the received art-net packets (default: false)
	--nogui	Disable the GUI (default: false)

artnet_to_opendmx.exe 0 COM4 --name "Interface1" --remember --verbose

artnet_to_opendmx.exe list

Settings-Window has scaling issues

Check if the application has the permission to scale the window. This should only be a problem on linux.
Flickering DMX output

If the DMX output flickers, try to increase the break time. This can happen if the DMX-Interface is not able to handle the data rate.

If multiple senders are sending data to the same universe, the data might interfere. Try to set the controller option to a specific sender.
Anything else?

Please open an issue if you encounter any other problems.

Make sure to install the dependencies listed in dependencies.txt before building the project.

Contributions are welcome! If you have something that could improve the program, please open an issue or a pull request.

~14–35MB
~507K SLoC