17 releases
0.2.15 | Sep 13, 2024 |
---|---|
0.2.13 | Jul 28, 2024 |
0.2.12 | Mar 27, 2024 |
0.2.10 | Nov 1, 2023 |
0.2.1 | Oct 25, 2021 |
#378 in Unix APIs
147 downloads per month
Used in lm-sensors
25KB
356 lines
sensors-sys
: Unsafe Rust bindings for libsensors
lm-sensors
provides user-space support for the hardware monitoring drivers
in Linux.
This crate is Linux-specific. Building it for non-Linux platforms, or for the Linux kernel, results in an empty crate.
This crate links to libsensors
, and requires it to be installed.
See below for example installation instructions.
Installing libsensors
This crate links to libsensors
, and requires it to be installed.
The library, its C header files, and the clang
compiler need to be installed on the build machine.
On Debian, for example, one can install that as follows:
$ sudo apt install clang libsensors-dev
If the library is linked dynamically (most typical configuration), then it needs to be installed on the target computer in order to run the resulting program. On Debian, for example, one can install it as follows:
$ sudo apt install libsensors5
Supported environment variables
This crate depends on some environment variables, and variants of those.
For each environment variable (e.g., CC
), the following are the accepted
variants of it:
<var>_<target>
, e.g.,CC_aarch64-unknown-linux-gnu
.<var>_<target-with-underscores>
, e.g.,CC_aarch64_unknown_linux_gnu
.TARGET_<var>
, e.g.,TARGET_CC
.<var>
, e.g.,CC
.
The following environment variables (and their variants) affect how this crate is built:
LMSENSORS_STATIC
LMSENSORS_PATH
LMSENSORS_INCLUDE_DIR
LMSENSORS_LIB_DIR
SYSROOT
CC
CFLAGS
Dynamic or static linking
This crate links to libsensors
dynamically if possible, except when targeting
platforms based on the musl
C library.
This behavior can be changed either by setting the environment variable
LMSENSORS_STATIC
to 1
, or by enabling the crate feature static
.
If both are defined, then the value of LMSENSORS_STATIC
takes precedence.
Setting LMSENSORS_STATIC
to 0
mandates dynamic linking.
Finding lm-sensors library and headers
By default, this crate finds lm-sensors headers and library based on the default target C compiler.
This behavior can be changed by:
- Either defining the environment variable
LMSENSORS_PATH
to the path of a directory containing the sub-directoriesinclude
andlib
where the headers and library are installed. - Or by defining one or both of the environment variables
LMSENSORS_INCLUDE_DIR
andLMSENSORS_LIB_DIR
to paths to the directories where headers and library are present. IfLMSENSORS_PATH
is also defined, thenLMSENSORS_INCLUDE_DIR
andLMSENSORS_LIB_DIR
take precedence.
Depending on this crate
This crate provides the following variables to other crates that depend on it:
DEP_LMSENSORS_INCLUDE
: Path of the directory where library C header files reside.DEP_LMSENSORS_LIB
: Path of the directory where the library binary resides.
Documentation-only build mode
The documentation-only build mode allows building documentation even if
libsensors
and its headers are unavailable.
To build in this mode, set the environment variable DOCS_RS
to 1
:
$ env DOCS_RS=1 cargo doc --open
The generated documentation is based on libsensors
version 3.6.0
.
⚠️ The generated crate might be unusable in this mode.
Versioning
This project adheres to Semantic Versioning.
The CHANGELOG.md
file details notable changes over time.
Dependencies
~0–2.8MB
~47K SLoC