Refer to the Changelog for information on releases.

Introduction

Sonnerie is a time-series database. Map a string to a list of timestamps and value. Store multiple of these series in a single database. Insert tens of millions of samples in minutes, on rotational media or solid-state.

Sonnerie is optimized for storing data that comes in as many values over many series (insertion of millions of items takes minutes and doesn't block other readers or writers), and for reading one series at a time in 10s of milliseconds. It is also very good at dumping lexicographically sequential series (which means: everything).

Sonnerie can very efficiently do random insertions and updates, and works well for huge databases. Due to the compact disk format, sparse data such as keys with only a few timestamps can be very efficiently stored.

Sonnerie is mostly intended for on-disk archival, realtime updates, and realtime accesses of individual series. For analytical purposes, one would load the necessary data into memory and process it through other means.

Features

• A straight-forward protocol for reading and writing
• Easy setup: insert data on the command line.
• No query language
• Transactional: a transaction is completely committed or not at all.
• Isolated: A transaction doesn't see updates from other transactions or expose its changes until it has been committed. Note the semantics of "last record wins" - if two transactions write two values with same key and timestamp, then the record from the last completed transaction will be the retained one.
• Durable: committed data is resistant to loss from unexpected shutdown.
• Nanosecond-resolution timestamps (64 bit), 1970-2554
• No weird dependencies, no virtual machines, one single native binary for the command line tool
• Floating point, integer, and string values, multiple columns per sample
• Concurrent reading of ranges with Rayon - do a "map-reduce" style query from Rust in 30 seconds per billion records per core on modern hardware.

Sonnerie runs on Unix-like systems and is developed on Linux.

Quick Start

Install

Sonnerie is implemented in Rust, a systems programming language that runs blazingly fast. Installation from source therefor requires you to install the rust compiler, which is as simple as: curl https://sh.rustup.rs -sSf | sh.

Sonnerie can then be installed from Cargo: cargo install sonnerie.

Sonnerie consists of one executable, sonnerie (~/.cargo/bin/sonnerie)

Create a database

Create a database by creating a directory and an empty file named "main":

mkdir database
touch database/main

Insert data

echo -e "\
fibonacci 2020-01-01T00:00:00 1
fibonacci 2020-01-02T00:00:00 1
fibonacci 2020-01-03T00:00:00 2
fibonacci 2020-01-04T00:00:00 3
fibonacci 2020-01-05T00:00:00 5
fibonacci 2020-01-06T00:00:00 8" \
| sonnerie -d database/ add --format u --timestamp-format=%FT%T

If the "add" command succeeds, then the transaction is committed to disk.

Items added with sonnerie add must be sorted lexicographically by their key and then chronologically. This requirement does not exist in sonnerie-serve.

Read the data back

sonnerie -d database/ read %

The % is a wildcard as is used in "LIKE" in SQL and filters on the key. Searching based on a prefix is very efficient:

sonnerie -d database/ read fib%

Sonnerie outputs the matched values:

fibonacci 2020-01-01 00:00:00     1
fibonacci 2020-01-02 00:00:00     1
fibonacci 2020-01-03 00:00:00     2
fibonacci 2020-01-04 00:00:00     3
fibonacci 2020-01-05 00:00:00     5
fibonacci 2020-01-06 00:00:00     8

Delete records

sonnerie -d database/ delete --after-time=2020-01-04

Instantaneously removes all values at the specified time and later, also available is --before-time and similar functions for filtering by key range.

The data is immediately removed from the database. A later compaction will purge it and recover disk space.

Deletions merely suppress output; reading a sequence of records that contain the deleted items will still have to iterate through the deleted records. You should thus compact (with --major) to not pay that penalty.

Usage

Row format

Each series has a format. The format is specified as a bunch of single character codes, one for each value.

The character codes are:

• f - a 32 bit float (f32)
• F - a 64 bit float (f64)
• u - a 32 bit unsigned integer (u32)
• U - a 64 bit unsigned integer (u64)
• i - a 32 bit signed integer (i32)
• I - a 64 bit signed integer (i64)
• s - a UTF-8 encoded string type. When strings are outputted, they are encoded in "backslash escaped" form, so all whitespace and backslashes are preceded by a backslash.

In the above "fibonacci" example, we're using the "u" format.

Multi-column rows are permitted; for two floating point values representing latitude and longitude:

oceanic-airlines 2018-01-01T00:00:00 ff 37.686751 -122.602227
oceanic-airlines 2018-01-01T00:00:01 ff 37.686810 -122.603713
oceanic-airlines 2018-01-01T00:00:02 ff 37.686873 -122.605997
oceanic-airlines 2018-01-01T00:00:03 ff 37.687022 -122.609997
oceanic-airlines 2018-01-01T00:00:04 ff 37.687364 -122.610945
oceanic-airlines 2018-01-01T00:00:05 ff 37.687503 -122.615211

Sonnerie allows heterogeneous formats.

A single key may change its format, for example:

keyname 2020-01-01T00:00:00 u 42
keyname 2020-01-02T00:00:00 f 3.1415
keyname 2020-01-03T00:00:00 s Now\ a\ string

While a key may change its format, it has more storage overhead, so it's best to not allow keys to oscillate between types.

This is permitted new in version 0.6, older versions had an "unsafe" mode that allowed the test to be bypassed for performance.

No server is necessary

All actions can be done by running sonnerie -d /path/to/data/. Furthermore, a file, (after it gets its ".tmp" suffix removed) will never change, though the files may sometimes get replaced. This means you can replicate a database by hardlinking all the files (ln).

The database must be compacted

On a regular (possibly daily) basis, you must compact the database. This rolls a bunch of transaction files into a single large transaction file. This is important for performance. By the time about 100 transaction files are present, performance suffers greatly. Therefor, compact the database at approximately the rate necessary to prevent that.

There are two types of compactions, a major and a minor one. A major one replaces the entire database, which requires reading and rewriting the entire database. A minor one replaces all of the transaction files with a single new transaction file. This is a lot faster because it requires only reading and rewriting the contents of the transaction files and not the main file.

A major compaction is accomplished with:

sonnerie -d /path/to/data/ compact --major

And a minor compaction:

sonnerie -d /path/to/data/ compact

Compacting doesn't block readers or writers, but only one can happen at any given moment, so a lock is placed to prevent multiple concurrent compactions.

Compactions are atomic, so you can cancel it (with ^C) at any time.

You can compact and filter

In case some data in the database needs to be modified, you can use compact with the --gegnum option. Gegnum means "through" in Icelandic.

This command removes records that start with bad-objects:

compact --major --gegnum 'grep -v ^bad-objects'

Do a normal compaction, but also count records:

compact --major --gegnum 'pv -l'

The --gegnum runs its command inside a /bin/sh, so pipelines work. Filter out bad objects AND modify the names of other objects:

compact --major --gegnum 'grep -v ^bad-objects | sed "s/^old-name/new-name/"'

The outut of the --gegnum command must be in sorted order.

You can also see a preview of its output by piping your command into | tee /dev/stderr.

Note that the rows come as "key\ttimestamp\tformat\tvalue"

You can also "read | filter | add" into a different database, but gegnum allows you to modify an existing database which is useful for online maintenance on a database that gets concurrent updates.

sonnerie-serve

A server is provided so that you can conveniently read and write to the database via HTTP.

Run sonnerie-serve -d /path/to/database/ -l 0.0.0.0:5555 and then you may make PUT and GET requests:

• Read the named series:

  curl http://localhost:5555/fibonacci

(The response is the entire series in a format similar to sonnerie read)

• Read series by wildcard:

  curl http://localhost:5555/fib%

(The response is each series, in alphabetical order, in a format similar to sonnerie read)

• Output human-readable timestamps:

  curl http://localhost:5555/fib%?human

(The timestamps are in ISO-8601 instead of nanoseconds)

• Add more data:

  curl -X PUT http://localhost:5555/ --data-binary 'fibonacci 1578384000000000000 u 13'

(200 OK means that the transaction was committed)

Unlike sonnerie add, sonnerie-serve allows unsorted input.

Note that because sonnerie mmaps its files, sonnerie-serve will show huge values for its virtual memory usage (VIRT in top), but actual memory utilization will be reasonable.

You may continue to read and modify your sonnerie database by the command line or even via another concurrently-running sonnerie-serves.

An alternate approach is to use "sshfs" to mount the database remotely. This approach is very performant because only compressed data goes through the network and the server doesn't need to do any of the decompressing. Avoid nfs because compactions will cause files to get deleted, and then the client will get an IO error, as NFS cannot track files that are closed on the server.

Contributing

Bug reports and pull requests are always welcome no matter how big or small. Development of Sonnerie is people-first and we comply with Rust's Code of Conduct.

If you use Sonnerie, please provide feedback!

Sonnerie is used in production

Sonnerie is used by Headline with a >100GiB database and 10s of billions of rows.

Performance

An approximate average lookup latency for a random key in a large database is around 15ms on an SSD and much slower on a busy rotational media device. Sequential access (i.e., reading the whole database in lexicographical order) is somewhere around 2k keys/sec and 3M records/sec, very much depending on the data itself.

Copyright

Sonnerie was implemented by Charles Samuels at Headline.

lib.rs:

Create an iterator of lines from a hyper::Body