Lib.rs

Laad

Rust library for parsing telemetry from a TBS battery monitor, such as the Battery Monitor Expert Modular.

So far it's been tested to decode most PGNs of a dump from the TBS Battery Monitor Expert Modular, except for those that dump internal registers and state.

Support this project

If you find this project useful, please consider supporting this project:

• Buymeacoffee

  

• Paypal

  

• Bitcoin: 18yNWDzQkgrV69HGHhK7aUMLBksR2a1UuA

Examples

The examples/ directory contains the laadreader command line tool that can be started against

• a packet sender that sends random packets (default),
• a packet sender that sends packets from a replay of communication with the battery monitor (argument --replay),
• and one (argument --ble that connects to a TBS battery monitor using Bluetooth Low Energy (BLE).

The laadreader tool connects via BLE to a device with "TBS" in its name and connects to the serial port characteristic on the TBS device, then waits for a moment for unsolicited packets, then sends a request all packet to retrieve more information.

Try reading from BLE

cargo build
cargo run --bin laadreader -- --ble

Typical output may look like this:

2025-01-06T18:21:18.070745Z  INFO laadreader: Decoded frame: Bb1dc(BasicQuantities { voltage: Some(11.309999), current: Some(-0.0625), temperature: NoSensorDetected })
2025-01-06T18:21:18.070755Z  INFO laadreader: Decoded frame: Bb1dc(BasicQuantities { voltage: Some(11.3), current: Some(-0.0546875), temperature: NoSensorDetected })
2025-01-06T18:21:18.070763Z  INFO laadreader: Decoded frame: Bb1dc(BasicQuantities { voltage: Some(11.309999), current: Some(-0.0546875), temperature: NoSensorDetected })
2025-01-06T18:21:18.070781Z  INFO laadreader: Decoded frame: Bb1dc(BasicQuantities { voltage: Some(11.3), current: Some(-0.0625), temperature: NoSensorDetected })
2025-01-06T18:21:18.071205Z ERROR laad::decoder: Checksum not valid for PGN tag: [18, F0], 0x4F vs 0xE6?
2025-01-06T18:21:18.071212Z ERROR laadreader: Received unknown frame
2025-01-06T18:21:18.071604Z  INFO laadreader: Decoded frame: Bb1dc(BasicQuantities { voltage: Some(11.309999), current: Some(-0.0546875), temperature: NoSensorDetected })
2025-01-06T18:21:18.071844Z  INFO laadreader: Decoded frame: AddressClaimed(AddressClaimed { device_id: ExpertModular, brand_id: TbsElectronics, serial_number: 227190006 })
2025-01-06T18:21:18.072241Z  INFO laadreader: Decoded frame: Acknowledgement(Acknowledgement { ack_type: PositiveAcknowledgement, pgn: 0x01F0 })
2025-01-06T18:21:18.072482Z  INFO laadreader: Decoded frame: DeviceName(DeviceName { name: "Akkumonitori" })
2025-01-06T18:21:18.072705Z  INFO laadreader: Decoded frame: VersionInfo(VersionInfo { firmware_version: Version { major: 1, minor: 0, maintenance: 5 }, hardware_version: Version { major: 1, minor: 0, maintenance: 0 }, bootloader_version: Version { major: 1, minor: 0, maintenance: 0 }, auxiliary_version: Version { major: 1, minor: 0, maintenance: 0 } })
2025-01-06T18:21:18.072722Z  INFO laadreader: Decoded frame: OperatingModeStatus(OperatingModeStatus { mode: DeviceOff, installer_lock: InstallerLockOff })
2025-01-06T18:21:18.072970Z  INFO laadreader: Decoded frame: Bb1dc(BasicQuantities { voltage: Some(11.3), current: Some(-0.0546875), temperature: NoSensorDetected })
2025-01-06T18:21:18.072987Z  INFO laadreader: Decoded frame: Bb1pc(PowerAndCharge { power: Some(419464930.0), consumed_amp_hours: Some(5964697.5) })
2025-01-06T18:21:18.073211Z  INFO laadreader: Decoded frame: Bb1st(BankStatus { state_of_charge: ChargePercentage(73.0), state_of_health: HealthPercentage(100.0), time_remaining: Minutes(32767) })
2025-01-06T18:21:18.073229Z  INFO laadreader: Decoded frame: Bb1bs(BasicSetup { bank_enable: Enabled, bank_name: MainBatteryBank, bank_capacity: CapacityAh(200), battery_type: AGM })
2025-01-06T18:21:18.073450Z  INFO laadreader: Decoded frame: Bb2dc(BasicQuantities { voltage: Some(11.37), current: None, temperature: Unavailable })
2025-01-06T18:21:18.073468Z  INFO laadreader: Decoded frame: Bb2st(BankStatus { state_of_charge: ChargePercentage(100.0), state_of_health: Unavailable, time_remaining: Unavailable })
2025-01-06T18:21:18.073691Z  INFO laadreader: Decoded frame: Bb2bs(BasicSetup { bank_enable: Enabled, bank_name: StarterBattery, bank_capacity: ParameterNotAvailable, battery_type: ParameterNotAvailable })
2025-01-06T18:21:18.073709Z  INFO laadreader: Decoded frame: Bb3dc(BasicQuantities { voltage: None, current: None, temperature: Unavailable })
2025-01-06T18:21:18.073944Z  INFO laadreader: Decoded frame: Bb3st(BankStatus { state_of_charge: Unavailable, state_of_health: Unavailable, time_remaining: Unavailable })
2025-01-06T18:21:18.073963Z  INFO laadreader: Decoded frame: Bb3bs(BasicSetup { bank_enable: Disabled, bank_name: ParameterNotAvailable, bank_capacity: ParameterNotAvailable, battery_type: ParameterNotAvailable })

Integrate laad into your project

To integrate the library into your own project, an example to use it looks like this.

let (bytes_tx, bytes_rx) = mpsc::channel(5);
    let (frames_tx, mut frames_rx) = mpsc::channel(5);

    configure_and_run_source(bytes_tx);

    // Source sends bytes to bytes_tx using bytes_tx.send(Bytes(bytes)).await.

    let mut frame_parser = FrameParser::new();

    tokio::spawn(async move {
        frame_parser.parse_frames(bytes_rx, frames_tx).await;
    });

    while let Some(frame) = frames_rx.recv().await {
        let decoder = decoder::Decoder {};
        let decoded = decoder.decode_frame(frame);
        match decoded {
            TbsPg::Unknown => {
                error!("Received unknown frame");
            }
            _ => {
                info!("Decoded frame: {:?}", decoded);
            }
        }
    }

Name

Laad as the library name is a play on the Dutch word for charging.

Acknowledgement

Thanks to Daniel Schouten and TBS Electronics B.V. for providing integration documentation for the protocol of the TBS Battery Monitor and charger devices.

License

MIT