10 releases
0.2.8 | Apr 2, 2024 |
---|---|
0.2.7 | Mar 28, 2024 |
0.2.6 | Feb 15, 2024 |
0.2.5 | Dec 31, 2023 |
0.2.3 | Nov 8, 2022 |
#136 in Cargo plugins
180 downloads per month
69KB
1.5K
SLoC
cargo-pgo
Cargo subcommand that makes it easier to use PGO and BOLT to optimize Rust binaries.
For an example on how to use cargo-pgo
to optimize a binary on GitHub Actions CI, see this workflow.
Installation
$ cargo install cargo-pgo
You will also need the llvm-profdata
binary for PGO and llvm-bolt
and merge-fdata
binaries for BOLT.
You can install the PGO helper binary by adding the llvm-tools-preview
component to your toolchain
with rustup
:
$ rustup component add llvm-tools-preview
For BOLT, it's unfortunately more complicated. See below for BOLT installation guide.
BOLT support is currently experimental.
PGO/BOLT workflow
It is important to understand the workflow of using feedback-directed optimizations. Put simply, it consists of three general steps:
- Build binary with instrumentation
- Perform a special build of your executable which will add additional instrumentation code to it.
- Gather performance profiles
- Run your instrumented binary on representative workloads. The binary will generate profile files on disk which will be then used to optimize the binary.
- Try to gather as much data as possible. Ideally, run your binary for at least a minute or more.
- Build an optimized binary using generated profiles
- The compiler will use the generated profiles to build an optimized version of your binary.
- The binary will be optimized with respect to the profiled workloads. If you execute it on a substantially different workload, the optimizations might not work (or they might even make your binary slower!).
Example
Usage
Before you start to optimize your binaries, you should first check if your environment is set up
correctly, at least for PGO (BOLT is more complicated). You can do that using the info
command:
$ cargo pgo info
PGO
cargo-pgo
provides subcommands that wrap common Cargo commands. It will automatically add
--release
to wrapped commands where it is applicable, since it doesn't really make sense to perform
PGO on debug builds.
Generating the profiles
First, you need to generate the PGO profiles by performing an instrumented build.
You can currently do that in several ways. The most generic command for creating an instrumented
artifact is cargo pgo instrument
:
$ cargo pgo instrument [<command>] -- [cargo-args]
The command
specifies what command will be executed by cargo
. It is optional and by default it
is set to build
. You can pass additional arguments for cargo
after --
.
There are several ways of producing the profiles:
-
Building a binary
$ cargo pgo build # or $ cargo pgo instrument build
This is the simplest and recommended approach. You build an instrumented binary and then run it on some workloads. Note that the binary will be located at
<target-dir>/<target-triple>/release/<binary-name>
. -
Running an instrumented program
$ cargo pgo run # or $ cargo pgo instrument run
You can also directly execute an instrumented binary with the
cargo pgo run
command, which is a shortcut forcargo pgo instrument run
. This command will instrument the binary and then execute it right away. -
Run instrumented tests
$ cargo pgo test # or $ cargo pgo instrument test
This command will generate profiles by executing tests. Note that unless your test suite is really comprehensive, it might be better to create a binary and run it on some specific workloads instead.
-
Run instrumented benchmarks
$ cargo pgo bench # or $ cargo pgo instrument bench
This command will generate profiles by executing benchmarks.
Building an optimized binary
Once you have generated some profiles, you can execute cargo pgo optimize
to build an optimized
version of your binary.
If you want, you can also pass a command to cargo pgo optimize
to e.g. run PGO-optimized benchmarks
or tests:
$ cargo pgo optimize bench
$ cargo pgo optimize test
Analyzing PGO profiles
You can analyze gathered PGO profiles using the llvm-profdata
binary:
$ llvm-profdata show <profile>.profdata
BOLT
Using BOLT with cargo-pgo
is similar to using PGO, however you either have to build
BOLT manually or download it from the GitHub releases archive (for LLVM 16+). Support for BOLT is currently in an
experimental stage.
BOLT is not supported directly by rustc
, so the instrumentation and optimization commands are not
directly applied to binaries built by rustc
. Instead, cargo-pgo
creates additional binaries that
you have to use for gathering profiles and executing the optimized code.
Generating the profiles
First, you need to generate the BOLT profiles. To do that, execute the following command:
$ cargo pgo bolt build
The instrumented binary will be located at <target-dir>/<target-triple>/release/<binary-name>-bolt-instrumented
.
Execute it on several workloads to gather as much data as possible.
Note that for BOLT, the profile gathering step is optional. You can also simply run the optimization step (see below) without any profiles, although it will probably not have a large effect.
Building an optimized binary
Once you have generated some profiles, you can execute cargo pgo bolt optimize
to build an
optimized version of your binary. The optimized binary will be named <binary-name>-bolt-optimized
.
BOLT + PGO
Yes, BOLT and PGO can even be combined :) To do that, you should first generate PGO profiles and
then use BOLT on already PGO optimized binaries. You can do that using the --with-pgo
flag:
# Build PGO instrumented binary
$ cargo pgo build
# Run binary to gather PGO profiles
$ ./target/.../<binary>
# Build BOLT instrumented binary using PGO profiles
$ cargo pgo bolt build --with-pgo
# Run binary to gather BOLT profiles
$ ./target/.../<binary>-bolt-instrumented
# Optimize a PGO-optimized binary with BOLT
$ cargo pgo bolt optimize --with-pgo
Do not strip symbols from your release binary when using BOLT! If you do it, you might encounter linker errors.
BOLT installation
Here's a short guide how to compile LLVM with BOLT manually. You will need a recent compiler, CMake
and
ninja
.
Note: LLVM BOLT is slowly getting into package repositories, although it's not fully working out of the box yet. You can find more details here if you're interested.
- Download LLVM
$ git clone https://github.com/llvm/llvm-project $ cd llvm-project
- (Optional) Checkout a stable version, at least 14.0.0
Note that BOLT is being actively fixed, so a$ git checkout llvmorg-14.0.5
trunk
version of LLVM might actually work better. - Prepare the build
$ cmake -S llvm -B build -G Ninja \ -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX=${PWD}/llvm-install \ -DLLVM_ENABLE_PROJECTS="clang;lld;compiler-rt;bolt"
- Compile LLVM with BOLT
The built files should be located at$ cd build $ ninja $ ninja install
<llvm-dir>/llvm-install/bin
. You should add this directory to$PATH
to make BOLT usable withcargo-pgo
.
Related work
- cargo-pgo I basically independently reimplemented this crate. It uses an almost identical approach, but doesn't support BOLT. It's not maintained anymore, I got a permission from its author to (re)use its name.
License
Dependencies
~9–20MB
~296K SLoC